Results 1 to 5 of 5
Thread: Oil Extractor
-
09-06-2020, 07:03 PM #1
Oil Extractor
Does anyone have any good recommendations for an oil extractor? I have had two now and both were crap. They take forever to extract the oil regardless if the engine is warmed or not.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
09-06-2020, 07:38 PM #2
I like this one a lot.
Drains in a couple minutes.
OEMTOOLS 24397 9.5 Liter Oil Extractor, Oil, Transmission, Coolant Change Tool, Easy-to-Use Hand Pump, Extract Fluid Through Dipstick Tubes, No Mess https://www.amazon.com/dp/B01BW393E2..._JkxvFbSWJM9XK
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
09-06-2020, 09:30 PM #3
i use a drill pump and it works awesome. you just need to get a connector to screw into the engine drain hose.
https://www.walmart.com/ip/Portable-...yABEgJwQvD_BwEScott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
09-07-2020, 06:06 PM #4
Appreciate it. I have the drill type from my old runabout. Never thought about getting an adapter and hooking that to the drain hose.
I like the pump type so I can change the trans and v drive fluid also.
Both good tips. Thank you.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
09-08-2020, 10:47 AM #5Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
I have this one as well and it works great on the Moomba, outboard on the toon, jet ski, mowers, etc.
OEMTOOLS 24397 9.5 Liter Oil Extractor, Oil, Transmission, Coolant Change Tool, Easy-to-Use Hand Pump, Extract Fluid Through Dipstick Tubes, No Mess https://www.amazon.com/dp/B01BW393E2..._JkxvFbSWJM9XK2005 Mobius LSV
325 EFI