Results 1 to 10 of 17
Thread: Pull out heater hose upgrade
-
09-01-2020, 06:54 PM #1
Pull out heater hose upgrade
My 2020 Mojo pull out heater ducts didn’t make it one summer. The unreasonably thin membrane rubbed through over the spiral wire and now they are leaking air out the hose. SC will only replace it with the same paper thin membrane that it left the factory with. The hose on my 2008 Mastercraft is still perfectly intact and we use it all the time.
Has anybody else experienced this and what product did you use to upgrade from factory?2020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
-
09-01-2020, 08:12 PM #2
I've used these people before.
https://heatercraft.com/collections/marine-heater-parts1998 Mobius
310 HP PCM
SOLD
-
09-01-2020, 08:30 PM #32020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
-
09-01-2020, 11:14 PM #4Member
- Join Date
- Sep 2016
- Location
- Horseheads, NY
- Posts
- 59
Look into RV sewer hose. It's a lot heavier duty and you can get a 25' roll from Walmart for like $10
-Scott
2000 Moomba Mobius V
-
09-02-2020, 08:20 AM #5
Heatercraft is the OEM so i'd wager they are the same paper thin crap.
Mastercraft uses Maradyne
I just ordered maradyne stuff to add a heater o my boat so I can tell you in a few days when it gets here.2020 Supra SA
-
09-02-2020, 08:26 AM #6
I looked into this for my Mojo, but then was concerned about how it would work. The hose has to able to collapse into that small space. A thicker hose might not and cause the vent to pop out all the time. My hose was torn at the end where it attached to the vent. I just cut the torn part and reattached it.
2020 Supra SL 400
2015 Moomba Mojo(Sold)
2018 Yamaha Waverunner(Just to fool around)
2018 F150 Lariat
sport edition, 3.5lt ecoboost
-
09-02-2020, 08:36 AM #7
Pull out heater hose upgrade
Never had an issue with mine and we use them often, however, I found some thicker mil hose awhile back, let me see if I can find it again
Edit:
https://www.cpperformance.com/p-9869...duct-hose.aspx
Sent from my iPhone using TapatalkLast edited by larry_arizona; 09-02-2020 at 08:39 AM.
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
09-02-2020, 03:08 PM #8
I have both tears and it’s worn over the spiral wires. I live in northern Canada so these are a heavy use item.
Thanks for all the replies. Lots of good leads. I let you know how I make out.
Sent from my iPhone using Tapatalk2020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
-
09-02-2020, 10:22 PM #9Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
https://photos.app.goo.gl/ZBnpKE82yGXbF14E6
Menards 6$..enough for 2 hoses, I just replace them yearly as people step on them.Last edited by parrothd; 09-02-2020 at 10:24 PM.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
09-02-2020, 10:27 PM #10Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Pics in how to replace.
https://photos.app.goo.gl/RUqEoGc7hSnMQUvM7http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead