First boat-- ordering a 2021 Max

[vonbottle]

Yep, yearly complaint waiting for the online build configurator.

Last year it took until mid October.


Sent from my iPhone using Tapatalk

frankly, i'm in no real rush as we'd be ordering for a may delivery date, but would like to be guaranteed a build spot, so a little anxious on that end as we're on the fence between max - craz - mojo

[larry_arizona]

frankly, i'm in no real rush as we'd be ordering for a may delivery date, but would like to be guaranteed a build spot, so a little anxious on that end as we're on the fence between max - craz - mojo

I highly suggest at minimum you talk to your dealer now about securing a build slot with a deposit.


Sent from my iPhone using Tapatalk

[vonbottle]

kind of off topic and should probably start a new thread - but who has a boat lift? we currently keep our boat in a boathouse, just tied up during the season, then we lift it out for winter with chain hoists and straps - it's worked fine for as long as we've been doing it (40+ years), but frankly a PITA and you need four people ideally to lift it. with the new boat we're looking at getting a lift, for ease of mind when we're not there and just plain ease in winter. for those that have a lift - what kind and if you recall, how much was it installed? i was just quoted a little over $12k for a 6700 lb Bast lift - i really had no idea what they'd run, but was expecting somewhere about half that

[2in2out]

This might help with your lift questions

https://forum.moomba.com/showthread....ight=boat+lift

[996scott]

The 2020 is still up on the configurator.
I optioned a '20 with all the features above. The base was 66260$, the features above increased it to 73410$. That's a diff of 7150$. This may not be correct. They will never make an incoming model 2100$ cheaper than the previous. We prolly need to just wait until the the new pricing tables come out officially, or I would like to see an actual build sheet from a dealer. Otherwise, we really are speculating.

The 2020 online build i did for my Craz and the 2021 actual build came out within $20.00 of each other, no joke. They both had the exact same options/build. The features that now come standard were ones i was getting anyways so the increased MSRP base price was higher but I added fewer options (because they were now standard). So as far as the Craz goes the price from 2020 to 2021 did not change (at least not for me).

[macdonaldmike76]

Redesigned mojo is all but confirmed, just late release.

Sent from my SM-G988U using Tapatalk

Sent from my iPhone using Tapatalk

[macdonaldmike76]

Redesigned mojo is all but confirmed, just late release.

Sent from my SM-G988U using Tapatalk

I had confirmation last week that the Mojo will be able to order in October. Sounds like will be a sweet boat.


Sent from my iPhone using Tapatalk

[vonbottle]

so i just got a build price back for a '21 craz - msrp came in a 79,300, discounted price at 72,500 - as you can tell it's not heavily optioned, but question - is $2700 for freight typical? seems a bit steep, i know it's not quite the same, but our last boat we had transported from canada to NH (bought it used on ebay - don't ask, total disaster, the boat we're actually replacing) for about $500 if i recall. and $2200 for dealer prep.....are these typical figures. think i can get him any lower? subtract out the freight and prep, and he's only taking 2.5% off - i don't want to be a cheap skate, but when people say you might expect 5-7% off, is that excluding freight/prep? or is that a good price? we're getting about $3800 in options with trailer delete credit. going to sit down with dealer tomorrow. we're reserving a build spot, but waiting til the new mojo comes out and will reevaluate then.

[Kirby]

so i just got a build price back for a '21 craz - msrp came in a 79,300, discounted price at 72,500 - as you can tell it's not heavily optioned, but question - is $2700 for freight typical? seems a bit steep, i know it's not quite the same, but our last boat we had transported from canada to NH (bought it used on ebay - don't ask, total disaster, the boat we're actually replacing) for about $500 if i recall. and $2200 for dealer prep.....are these typical figures. think i can get him any lower? subtract out the freight and prep, and he's only taking 2.5% off - i don't want to be a cheap skate, but when people say you might expect 5-7% off, is that excluding freight/prep? or is that a good price? we're getting about $3800 in options with trailer delete credit. going to sit down with dealer tomorrow. we're reserving a build spot, but waiting til the new mojo comes out and will reevaluate then.

4250 freight to Seattle...

[vonbottle]

4250 freight to Seattle...

yikes! that's a big hit you don't really think about when pricing it out