Air Bubbles in Non-skid snap-in flooring (2018 Moomba Max)???

[Swervy]

Hi everyone,
Has anyone experienced air bubbles forming in their non-skid snap in flooring. We recently purchased a 2018 Moomba Max and our flooring started to form pockets of air in random spots and it feels like walking on bubble wrap. Has anyone experienced this type of issue and was what your fix?

Thanks!

[RC_Hinojosa]

Get a razor blade, poke a tiny hole and squeeze the bubble out.

Sent from my Note 9 using Tapatalk

[Swervy]

Get a razor blade, poke a tiny hole and squeeze the bubble out. hitting

Sent from my Note 9 using Tapatalk

That's what I was thinking of doing or hitting them with a sharp pin. Just not sure if that will lead to more problems.
Thanks

[haknslash]

I had one small one form on the gatorstep on top of the dash but it went away on its own. I was going to do as suggested above and poke a very small hole in the middle but it was gone by the next time I got the boat out of storage.

[jimmsch]

It started with air bubbles, then the entire thing just completely separated after less than 2 seasons. I went ahead and spent the $1000 for Gatorstep. I showed Zandar (he's 10) how to install it by doing the first piece around captain's chair and literally left him alone with the rest. He finished in less than an hour. Best upgrade I ever did to a boat.

https://forum.moomba.com/showthread....Step-Installed