Broke my racks. Help

[Isaguel]

I'll keep everyone updated. My sacrifice will lead to a good learning opportunity for the community at large.

[Max20]

The replacement part could be made out of 6061 aluminum bar stock and machined down. I would take the other side off and reverse engineer it if it were me. The manufacturer should have a replacement part though if you talk to the right person

[DNIXD99]

You have me thinking there could be a market for this. I own a machine shop. Surely the manufacturer sells parts.

[jcarter20]

You have me thinking there could be a market for this. I own a machine shop. Surely the manufacturer sells parts.

There is a market for this. I added ski racks above my clamps on my tower. I had to go to a machine shop to have a spacer made to make them stick out far enough. All of this stuff is ridiculously over priced in my opinion. Don’t get me wrong Roswell and PTM is good stuff, but $4,000 for a set PTM clamps....come on. Of course I paid the money to add them to my Moomba because I didn’t like the Triton option. Had there been an option even $1,000 cheaper, I would have gone for it. I know people who have needed misc. parts / adapters, etc.... and the only option is a local machine shop.


Sent from my iPhone using Tapatalk

[larry_arizona]

JL tower speaker clamps for the FXone tower are another item that is unavailable.


Sent from my iPhone using Tapatalk

[MJHSupra]

Call PTM, the number is on the web site. Ask for Brandon in customer service. Good dude. Helped me with my PTM mirror. I'm lucky they are local.

Sent from my P00I using Tapatalk

[Isaguel]

Call PTM, the number is on the web site. Ask for Brandon in customer service. Good dude. Helped me with my PTM mirror. I'm lucky they are local.

Sent from my P00I using Tapatalk

You wouldn't happen to remember an ext # for him, would u? Or a last name.

[MJHSupra]

You wouldn't happen to remember an ext # for him, would u? Or a last name.

Let me see if I can find it . . . .

[MJHSupra]

You wouldn't happen to remember an ext # for him, would u? Or a last name.

Jason Blanton. Small company.

[Isaguel]

Update. Just got my racks back. Thanks to steve Dokter at Nisswa marine. He was able to order the parts and their shop put it together. So stoked to have the boat whole again. Took 4 weeks. Steve contacted Jason from PTM . They had to fit the parts order into their production line so it took a few days. All in all I’m very happy. One thing is the color is slightly mismatched. The powder coat for the Supra parts is slightly lighter than the regular PTM. No biggie.
Here’s a pic of them installed.
If your curious, total cost <350$ installed, for both. A bargain in my opinion. My dealer charged me the same that pTM charged them for the parts , no up charge + some labor.



Sent from my iPhone using Tapatalk