Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11

    Default

    Quote Originally Posted by larry_arizona View Post
    Most flag poles for a 3x5 flag are around 1” diameter.


    Sent from my iPhone using Tapatalk
    Not the ones I've owned, apparently. All of the flags I've owned have small, 1/2" dia or less flag shafts.

    We are talking skier's flag, correct?

    61ir4kMzNwL._AC_UX385_.jpg
    2017 Moomba Mondo

  2. #12
    Join Date
    May 2018
    Posts
    4,920

    Default

    Quote Originally Posted by audisnapr View Post
    Not the ones I've owned, apparently. All of the flags I've owned have small, 1/2" dia or less flag shafts.

    We are talking skier's flag, correct?

    61ir4kMzNwL._AC_UX385_.jpg
    Ahh makes sense for a Skier’s flag.

    Honestly not sure if the OP is talking Skier’s flag or 3x5 flag, but because he brought it up on the 4th of July, I assumed American flag 3x5.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  3. #13
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Ya I was talking about an American Flag 3 x 5. That seems like a good option for a skiers flag though.
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  4. #14
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    I used a 1" pipe for my 3x5' flag. I wrapped the base of the pipe with a few layers of gorilla tape to eliminate any rattles and ensure sung fit in the flag holder.

    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  5. #15
    Join Date
    Oct 2021
    Posts
    7

    Default

    If you mean specifically the attachment of the flag, it is traditionally tied with a stocked knot. For this purpose, the flag should have loops, if they`re absented, it isn`t difficult to make (tie) yourself. If you're interested in mounting a flagpole - aluminum or stainless steel mount will do. I chose the second option for myself. Also, I installed a best flagpole light on my flagpole. If you need additional illumination and saving money at the same time - that’s great option. This light is solar powered, very reliable at night, cause it doesn`t go down, and has no service troubles.

  6. #16
    Join Date
    Jan 2021
    Location
    South Florida
    Posts
    274

    Default

    I got my flag poles and mounts from

    https://www.towerflags.com/?gclid=Cj...8aApJ-EALw_wcB

    for my boat a few weeks ago and installed them. I also received dock post mounts for when my boat is on the lift and installed them today.
    Attached Images Attached Images

  7. #17
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    Those are sharp looking. Those flag poles look like some stiff carbon fiber too.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  8. #18
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,065

    Default

    Ian from Tower Flags is a good dude and does a great job. I have a few versions of his flag poles on my boat.

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  9. #19
    Join Date
    May 2018
    Posts
    4,920

    Default

    Tower flag holder is legit.

    3D printed, but stout. With a little sanding and paint it would be even better.

    Just a heads up on the fxone application, take the pole out when folding the tower.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  10. #20
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    So here's a flag holder for ya! LOL! He has this out every 4th, and Memorial Day.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •