Pro Tower Flag Mount

[audisnapr]

Most flag poles for a 3x5 flag are around 1” diameter.


Sent from my iPhone using Tapatalk

Not the ones I've owned, apparently. All of the flags I've owned have small, 1/2" dia or less flag shafts.

We are talking skier's flag, correct?

61ir4kMzNwL._AC_UX385_.jpg

[larry_arizona]

Not the ones I've owned, apparently. All of the flags I've owned have small, 1/2" dia or less flag shafts.

We are talking skier's flag, correct?

61ir4kMzNwL._AC_UX385_.jpg

Ahh makes sense for a Skier’s flag.

Honestly not sure if the OP is talking Skier’s flag or 3x5 flag, but because he brought it up on the 4th of July, I assumed American flag 3x5.


Sent from my iPhone using Tapatalk

[TXSurf4]

Ya I was talking about an American Flag 3 x 5. That seems like a good option for a skiers flag though.

[RC_Hinojosa]

I used a 1" pipe for my 3x5' flag. I wrapped the base of the pipe with a few layers of gorilla tape to eliminate any rattles and ensure sung fit in the flag holder.

Sent from my Note 9 using Tapatalk

[JassyKel]

If you mean specifically the attachment of the flag, it is traditionally tied with a stocked knot. For this purpose, the flag should have loops, if they`re absented, it isn`t difficult to make (tie) yourself. If you're interested in mounting a flagpole - aluminum or stainless steel mount will do. I chose the second option for myself. Also, I installed a best flagpole light on my flagpole. If you need additional illumination and saving money at the same time - that’s great option. This light is solar powered, very reliable at night, cause it doesn`t go down, and has no service troubles.

[Bigs28]

I got my flag poles and mounts from

https://www.towerflags.com/?gclid=Cj...8aApJ-EALw_wcB

for my boat a few weeks ago and installed them. I also received dock post mounts for when my boat is on the lift and installed them today.

[HFarr]

Those are sharp looking. Those flag poles look like some stiff carbon fiber too.

Sent from my SM-G781V using Tapatalk

[MJHSupra]

Ian from Tower Flags is a good dude and does a great job. I have a few versions of his flag poles on my boat.

Sent from my P00I using Tapatalk

[larry_arizona]

Tower flag holder is legit.

3D printed, but stout. With a little sanding and paint it would be even better.

Just a heads up on the fxone application, take the pole out when folding the tower.


Sent from my iPhone using Tapatalk

[HFarr]

So here's a flag holder for ya! LOL! He has this out every 4th, and Memorial Day.

Sent from my SM-G781V using Tapatalk