Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default Pro Tower Flag Mount

    This question is definitely a little late for this holiday weekend but I am wondering if anyone knows the best way to mount flags to the pro tower to fly while underway?

    Hopefully I can get this sorted out for Labor Day!


    Sent from my iPhone using Tapatalk
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  2. #2
    Join Date
    May 2018
    Posts
    4,920

    Default

    Big Air is the mount I am considering.


    http://bigairwaketowers.com/accessories/flag-holder/


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  3. #3
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    I have the aluminum mount from Airhead.....it used to be way cheaper so I'm guessing they don't make it anymore.

    https://www.amazon.com/AIRHEAD-FWT-1...ad+flag&sr=8-9

    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  4. #4
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Both look like great options. Thanks!!


    Sent from my iPhone using Tapatalk
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  5. #5
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Does anyone know the OD of the tubing on the Pro Tower? Lol

    I just put the boat up yesterday.... I can always run back over there but figured I would ask first.


    Sent from my iPhone using Tapatalk
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  6. #6

    Default

    Our boat is new to us (2017 Mondo) so I'm not entirely sure if I have the pro tower but I can say that our tower is 2-3/8" (2.375") dia. I ordered a set of these and use one of them for the flag on the top bar above the bimini. The shaft of the flag fits perfectly through the hole in the bracket. I added a little stopper on the flag shaft so that it sits in the hole a couple of inches. Works great for us and looks much better, IMHO, than the purpose-built stuff on the market.

    https://amzn.to/2CgCn30

    boat pic for reference
    IMG_0017.jpg
    2017 Moomba Mondo

  7. #7
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by audisnapr View Post
    Our boat is new to us (2017 Mondo) so I'm not entirely sure if I have the pro tower but I can say that our tower is 2-3/8" (2.375") dia. I ordered a set of these and use one of them for the flag on the top bar above the bimini. The shaft of the flag fits perfectly through the hole in the bracket. I added a little stopper on the flag shaft so that it sits in the hole a couple of inches. Works great for us and looks much better, IMHO, than the purpose-built stuff on the market.

    https://amzn.to/2CgCn30

    boat pic for reference
    IMG_0017.jpg
    You have the Roswell A3 tower on your Mondo, the Pro tower wasn't available till 2019....it's the Supra tower before the FX One.

    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  8. #8
    Join Date
    May 2018
    Posts
    4,920

    Default

    Quote Originally Posted by audisnapr View Post
    Our boat is new to us (2017 Mondo) so I'm not entirely sure if I have the pro tower but I can say that our tower is 2-3/8" (2.375") dia. I ordered a set of these and use one of them for the flag on the top bar above the bimini. The shaft of the flag fits perfectly through the hole in the bracket. I added a little stopper on the flag shaft so that it sits in the hole a couple of inches. Works great for us and looks much better, IMHO, than the purpose-built stuff on the market.

    https://amzn.to/2CgCn30

    boat pic for reference
    IMG_0017.jpg
    So you need a flag pole with a 0.44” diameter?


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  9. #9

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    You have the Roswell A3 tower on your Mondo, the Pro tower wasn't available till 2019....it's the Supra tower before the FX One.

    Sent from my Note 9 using Tapatalk
    Quote Originally Posted by larry_arizona View Post
    So you need a flag pole with a 0.44” diameter?


    Sent from my iPhone using Tapatalk
    Gotcha, thank you. I guess the concept still holds whatever the tower diameter ends up being.

    Or there abouts. I had planned on drilling the hole to whatever size works for the flag but in our case, it worked perfectly with the wood dowel portion of the flag shaft. The plastic surround on the shaft is much bigger but there was no need to drill out the bracket for that.
    2017 Moomba Mondo

  10. #10
    Join Date
    May 2018
    Posts
    4,920

    Default

    Most flag poles for a 3x5 flag are around 1” diameter.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •