Results 11 to 20 of 21
Thread: Pro Tower Flag Mount
-
07-08-2020, 12:47 PM #11Member
- Join Date
- Oct 2019
- Posts
- 49
Not the ones I've owned, apparently. All of the flags I've owned have small, 1/2" dia or less flag shafts.
We are talking skier's flag, correct?
61ir4kMzNwL._AC_UX385_.jpg2017 Moomba Mondo
-
07-08-2020, 03:16 PM #12
-
07-08-2020, 03:38 PM #13
Ya I was talking about an American Flag 3 x 5. That seems like a good option for a skiers flag though.
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
07-09-2020, 12:33 AM #14
I used a 1" pipe for my 3x5' flag. I wrapped the base of the pipe with a few layers of gorilla tape to eliminate any rattles and ensure sung fit in the flag holder.
Sent from my Note 9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
10-21-2021, 03:01 AM #15Junior Member
- Join Date
- Oct 2021
- Posts
- 7
If you mean specifically the attachment of the flag, it is traditionally tied with a stocked knot. For this purpose, the flag should have loops, if they`re absented, it isn`t difficult to make (tie) yourself. If you're interested in mounting a flagpole - aluminum or stainless steel mount will do. I chose the second option for myself. Also, I installed a best flagpole light on my flagpole. If you need additional illumination and saving money at the same time - that’s great option. This light is solar powered, very reliable at night, cause it doesn`t go down, and has no service troubles.
-
03-31-2022, 11:49 AM #16Senior Member
- Join Date
- Jan 2021
- Location
- South Florida
- Posts
- 274
I got my flag poles and mounts from
https://www.towerflags.com/?gclid=Cj...8aApJ-EALw_wcB
for my boat a few weeks ago and installed them. I also received dock post mounts for when my boat is on the lift and installed them today.
-
03-31-2022, 01:11 PM #17
Those are sharp looking. Those flag poles look like some stiff carbon fiber too.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
04-01-2022, 12:20 AM #18
Ian from Tower Flags is a good dude and does a great job. I have a few versions of his flag poles on my boat.
Sent from my P00I using Tapatalk2018 Supra SL400
-
04-01-2022, 09:21 AM #19
Tower flag holder is legit.
3D printed, but stout. With a little sanding and paint it would be even better.
Just a heads up on the fxone application, take the pole out when folding the tower.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-02-2022, 06:22 PM #20
So here's a flag holder for ya! LOL! He has this out every 4th, and Memorial Day.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub