Results 1 to 10 of 21
Thread: Pro Tower Flag Mount
-
07-04-2020, 11:35 PM #1
Pro Tower Flag Mount
This question is definitely a little late for this holiday weekend but I am wondering if anyone knows the best way to mount flags to the pro tower to fly while underway?
Hopefully I can get this sorted out for Labor Day!
Sent from my iPhone using Tapatalk2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
07-05-2020, 07:14 AM #2
Big Air is the mount I am considering.
http://bigairwaketowers.com/accessories/flag-holder/
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-05-2020, 07:52 AM #3
I have the aluminum mount from Airhead.....it used to be way cheaper so I'm guessing they don't make it anymore.
https://www.amazon.com/AIRHEAD-FWT-1...ad+flag&sr=8-9
Sent from my Note 9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
07-05-2020, 08:50 AM #4
Both look like great options. Thanks!!
Sent from my iPhone using Tapatalk2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
07-05-2020, 03:22 PM #5
Does anyone know the OD of the tubing on the Pro Tower? Lol
I just put the boat up yesterday.... I can always run back over there but figured I would ask first.
Sent from my iPhone using Tapatalk2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
07-08-2020, 10:39 AM #6Member
- Join Date
- Oct 2019
- Posts
- 49
Our boat is new to us (2017 Mondo) so I'm not entirely sure if I have the pro tower but I can say that our tower is 2-3/8" (2.375") dia. I ordered a set of these and use one of them for the flag on the top bar above the bimini. The shaft of the flag fits perfectly through the hole in the bracket. I added a little stopper on the flag shaft so that it sits in the hole a couple of inches. Works great for us and looks much better, IMHO, than the purpose-built stuff on the market.
https://amzn.to/2CgCn30
boat pic for reference
IMG_0017.jpg2017 Moomba Mondo
-
07-08-2020, 11:08 AM #72017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
07-08-2020, 11:44 AM #8
-
07-08-2020, 11:58 AM #9Member
- Join Date
- Oct 2019
- Posts
- 49
Gotcha, thank you. I guess the concept still holds whatever the tower diameter ends up being.
Or there abouts. I had planned on drilling the hole to whatever size works for the flag but in our case, it worked perfectly with the wood dowel portion of the flag shaft. The plastic surround on the shaft is much bigger but there was no need to drill out the bracket for that.2017 Moomba Mondo
-
07-08-2020, 12:39 PM #10
Most flag poles for a 3x5 flag are around 1” diameter.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan