Results 1 to 5 of 5
Thread: Fat Sac Replacement Issue
-
07-04-2020, 01:51 PM #1Member
- Join Date
- Jun 2016
- Location
- Alberta
- Posts
- 41
Fat Sac Replacement Issue
Hi, I have a 2016 Mondo that came with 750# fat sacs in the rear.
I've purchased 1150# fat sacs that will fit (from Wakemakers).
The issue I'm having is removing the quick connects from the old bags to install them on the new one. There is a top connector and a bottom connector, they're identical.
All of the other plugs screw in, I'm assuming all 4 port holes are identical.
I can't even budge the screw-in quick connects, are they just screwed in or is it possible they screwed and glued them in from the factory?
Or am I just weak?
Thanks.
-
07-04-2020, 02:02 PM #2
If you are talking about the fittings that are glued in, you have to heat them with a hair dryer for 10-20 mins, and break the seal with you foot.
There is a video on this:
https://youtu.be/qpW_x9MeAQo
Sent from my iPhone using Tapatalk2018 Supra SL400
-
07-05-2020, 12:34 PM #3
I recommend just buying new fitting and glueing those in as well. Use JB Weld Marine formula.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
07-06-2020, 11:52 AM #4Member
- Join Date
- Jun 2016
- Location
- Alberta
- Posts
- 41
-
07-06-2020, 11:52 AM #5Member
- Join Date
- Jun 2016
- Location
- Alberta
- Posts
- 41