Results 1 to 2 of 2
-
07-01-2020, 08:54 AM #1Member
- Join Date
- Apr 2009
- Location
- Raleigh, NC
- Posts
- 62
looking for 3/4" male quick connect to 3/4" male NPS connector for ballast
I'm adding a 4th sprinkler valve for a front ballast upgrade. I've found everything I need from WakeMakers except the quick connect fitting that goes into the sprinkler valve. This is in a 2005 Moomba Mobius LSV. The original ballast system has one of these connectors in each of the 3 sprinkler valves. Does anyone know where I can get one or have one laying around you no longer need after doing an upgrade? The part would be 3/4" male quick connect on one end and 3/4" threaded NPS on the other end.
Thanks!05 Mobius LSV - gravity 3 ballast and wake plate
single axle trailer
DIY hot water shower installed
DIY tube inflator installed
-
07-01-2020, 04:45 PM #2Member
- Join Date
- Apr 2009
- Location
- Raleigh, NC
- Posts
- 62
I figured out a way to make it work with 2 fittings and a short hose between them.
05 Mobius LSV - gravity 3 ballast and wake plate
single axle trailer
DIY hot water shower installed
DIY tube inflator installed