Page 8 of 14 FirstFirst ... 678910 ... LastLast
Results 71 to 80 of 131
  1. #71
    Join Date
    Oct 2014
    Location
    PA
    Posts
    9

    Default 20 footer

    Quote Originally Posted by ejj View Post
    Dealer told me the same thing. It wasn’t a huge seller the last few years. The new Mondo will be 20 feet.
    It would be nice if they came out with a 20 footer that would surf and slalom well. My friends and family seem to surf and ski a lot but not wakeboard as much as we used to. I’m starting to rack up some hrs on my 2011 OBV and have no idea what I’d replace it with. If they’re going to release a new 20 footer they might as well make it crossover worthy as the only reason I wouldn’t just go to a big surf only oriented Boat is that we all still enjoy ripping a slalom ski on a glassy morning or eve. Seems like malibu and nautique still recognize that niche but SC has ignored it.

  2. #72
    Join Date
    Jun 2020
    Posts
    2

    Default

    Quote Originally Posted by TheYachtGroup View Post
    These ezDRIVE Sternthrusters seem to be great options for the Moomba and Supra lines! They've been installed on a variety of models and seem to have great customer feedback. See the links below for more details.

    SUPRA:
    https://www.ezdrivethruster.com/inst...2-2008-mockup/
    https://www.ezdrivethruster.com/inst...tos/supra-lsv/

    MOOMBA:
    https://www.ezdrivethruster.com/inst...ba-makai-2020/
    Installing voids hull warranty. FYI.


    Sent from my iPad using Tapatalk

  3. #73

    Default

    Quote Originally Posted by Starrski View Post
    It would be nice if they came out with a 20 footer that would surf and slalom well. My friends and family seem to surf and ski a lot but not wakeboard as much as we used to. I’m starting to rack up some hrs on my 2011 OBV and have no idea what I’d replace it with. If they’re going to release a new 20 footer they might as well make it crossover worthy as the only reason I wouldn’t just go to a big surf only oriented Boat is that we all still enjoy ripping a slalom ski on a glassy morning or eve. Seems like malibu and nautique still recognize that niche but SC has ignored it.
    That is exactly what we are looking for too. We ski in the morning and evening. We’d like to surf after lunch when the chop and wind are up.

    Skiing and surfing are on the opposite ends of boat-abilities though—so it’s tough to get something that will do both moderately well. With 3700lbs ballast the new Mondo should have decent surfing, but likely a smaller pocket that comes with a shorter boat. I’m not hoping to compete with a ski boat for wake—but hopefully something that won’t kill people at 28mph.

  4. #74
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    I think someone was on here complaining about the FX One tower rattling....

    Here's a quick writeup on how to address the issue without a dealer trip:

    https://www.facebook.com/groups/1786...8843047854508/



    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  5. #75
    Join Date
    May 2018
    Posts
    4,930

    Default

    For those of us who don’t Facebook, can someone please copy paste the fxone procedure here?


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  6. #76
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by larry_arizona View Post
    For those of us who don’t Facebook, can someone please copy paste the fxone procedure here?


    Sent from my iPhone using Tapatalk
    My bad Kent...

    "2018 and up Supra owners, if you think your FX1 tower is a bit rattling or moving, here's how to fix it without taking it in... my dealer called to walk me through how to do it on my lift....very easy, 10 minute - 1 beer job. 3/16 hex bit, 3/4 wrench, 4 screws a side, then 3 nuts to tighten per side. Don't let the panel fall."



    Sent from my Note 9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  7. #77
    Join Date
    May 2018
    Posts
    4,930

    Default

    Thanks RC!!


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  8. #78
    Join Date
    May 2018
    Posts
    4,930

    Default

    Literally just checked both sides on mine and tight as can be.

    15 min or less to check.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  9. #79
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,080

    Default

    KnoxMojo on the good Fbook post on the tower procedure!
    2018 Supra SL400

  10. #80
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,032

    Default

    kudos for skiers choice for a part on a boat that is (1) easy to get to and (2) easy to tighten.....
    '06 Supra Launch 20SSV-gone but never forgotten

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •