Bilge pump

[Samtuck]

Need help,bilge pump not working in manual,already checked fuses,fuse was blown at battery and pump worked earlier in day. light isn't turning on switch either. Put volt meter on switch and no power going to it,auto is working already filled with water and is working. Anybody know if brown and white wire has power when checking with meter,followed the wire and couldn't find any voltage,2016 craz any help would help

[Stazi]

Did you check the breaker under the dash as well?


Sent from my iPhone using Tapatalk

[Samtuck]

Yea stazi I checked it I even checked it with the blower fuse

Sent from my SM-G955U using Tapatalk

[Stazi]

You need to find out why the power going to the switch to turn it on manually isn’t there.


Sent from my iPhone using Tapatalk

[Samtuck]

I put my meter everywhere I could find the wire and couldn't get any voltage

Sent from my SM-G955U using Tapatalk

[Stazi]

That’s the problem then. 12V to the switch needs to be there.


Sent from my iPhone using Tapatalk

[Samtuck]

Orange wire to my switch has voltage and the ground is grounded but brown white wire nothing

Sent from my SM-G955U using Tapatalk

[Stazi]

When you flick the switch the brown/white wire should go 12V. The ground there is only for the light illumination.


Sent from my iPhone using Tapatalk

[Samtuck]

O ok but yea I flip the switch and brown wire has nothing

Sent from my SM-G955U using Tapatalk

[Stazi]

Weird. Switch might be bad. Try jumping the orange to the brown and see if it kicks the pump on.


Sent from my iPad using Tapatalk