Results 1 to 2 of 2
Thread: Rear Trunk Lid Replacement?
-
06-07-2020, 03:49 PM #1Junior Member
- Join Date
- Jun 2020
- Posts
- 1
Rear Trunk Lid Replacement?
Hello I'm a newb - Was looking through the forum to see if anyone has ran into the same issue my family and I have but was unsuccessful in finding such in the forum. I have a 99 Outback LS and the rear trunk lid which appears to be made out of PVC foam board finally cracked. Years of steppin on, walking over and too much weight finally cracked it. Does anyone know (I haven't been able to find) if Moomba or another reseller sells the replacement?
Thank you in advance!
-
06-07-2020, 08:34 PM #2
You're going to have to fabricate it, very doubtful that you would find one in decent shape.
Sent from my SM-G955U using Tapatalk2008 OBV
325 EFI with closed cooling
Gravity III with 750's in the rear, 400 stock floor, 750 IBS
Servo valve ballast upgrade
Wetsounds Rev10
JL Amps, WS420BT
2000 Outback LS <-- Sold!!!
310 Carb Direct Drive
800# Rear Locker
750# IBS (should have kept this for the OBV)
Dual Batteries with 2 Bank Charger System
Kenwood Head with Remotes
Too many hours restoring exterior from prior negligence to count!