Results 1 to 10 of 14
Thread: HELP wanted with 2020 Craz wave
Threaded View
-
06-04-2020, 12:26 PM #12Junior Member
- Join Date
- Feb 2020
- Location
- Indiana
- Posts
- 4
Here is our 2019 Craz (stock ballast) setup that works every time:
Autowake OFF
300lbs of lead evenly distributed evenly under rear bags
100lbs of lead evenly distributed evenly in the bow
Fill all ballast 100%
Wakeplate at 0-10
Leave surf plates at factory settings
Speed = 10.8-11.2
Tip 1: Make sure your bags are actually full, and burp any air out of the bags. We do this once per weekend. The tanks are on timers and will some times lie to you. Our front tanks are rarely even close to full when the pump shuts off.
Tip 2: Get a good board. The best thing I ever did as a bigger rider on a small-ish wave was get a Slingshot Coaster. You will not regret it. Use all 3 fins at first, then start removing them for more fun as you get comfortable.
Tip 3: Autowake: just don't use it until you get your wave dialed in without it. We never use at this point, and always have a great wave.