Results 1 to 10 of 14
Thread: HELP wanted with 2020 Craz wave
Hybrid View
-
06-03-2020, 12:56 PM #1Junior Member
- Join Date
- Feb 2020
- Posts
- 6
HELP wanted with 2020 Craz wave
So picked up the new boat and having a hard time dialing in the wave. I did upgrade the factory rear bags to the 1190 wake makers bags. have tried tabs at 65-80 percent wp at 0 and around 10.8-11.2 mph. front bag usually at 100 percent. surf side 100 and other side 60-70... Im a bigger guy 250lbs just seeing if anyone can give me any info that might help of that I am doing wrong. There is usually 3-4 people in the boat. Again I appreciate any help or ideas. thanks in advance
-
06-03-2020, 12:59 PM #2
HELP wanted with 2020 Craz wave
What are your pitch and roll numbers?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-03-2020, 01:02 PM #3Junior Member
- Join Date
- Feb 2020
- Posts
- 6
I will admit that I forgot to get yesterday when I was out.
-
06-03-2020, 01:05 PM #4Junior Member
- Join Date
- Feb 2020
- Posts
- 6
-
06-03-2020, 01:05 PM #5
Big guy here
Speed is good....Fill front and surfside 100%, non-surf 85%.
(Ideally get some lead so you can fill 100% all the way around)
Surf tab around 85%, wakeplate 0-10%
Sent from my SM-N960U using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
06-03-2020, 01:09 PM #6Junior Member
- Join Date
- Feb 2020
- Posts
- 6
-
06-21-2020, 10:24 AM #7
-
06-03-2020, 01:06 PM #8
Does your Autowake surf presets not give a good wave?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-03-2020, 01:14 PM #9Junior Member
- Join Date
- Feb 2020
- Posts
- 6
no its short and decent height not much push
-
06-03-2020, 05:12 PM #10
Push seems to be greatly increased with more ballast and displacement.
Key is to find your pitch and roll that gives you a good shape and clean wave, use minimal wake plate (I only tweak wakeplate slightly if I lose my pitch mid session), once you have that figured out, add lead midship to increase push with displacement.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan