Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    Default HELP wanted with 2020 Craz wave

    So picked up the new boat and having a hard time dialing in the wave. I did upgrade the factory rear bags to the 1190 wake makers bags. have tried tabs at 65-80 percent wp at 0 and around 10.8-11.2 mph. front bag usually at 100 percent. surf side 100 and other side 60-70... Im a bigger guy 250lbs just seeing if anyone can give me any info that might help of that I am doing wrong. There is usually 3-4 people in the boat. Again I appreciate any help or ideas. thanks in advance

  2. #2
    Join Date
    May 2018
    Posts
    4,928

    Default HELP wanted with 2020 Craz wave

    What are your pitch and roll numbers?


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  3. #3

    Default

    I will admit that I forgot to get yesterday when I was out.

  4. #4
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Big guy here

    Speed is good....Fill front and surfside 100%, non-surf 85%.

    (Ideally get some lead so you can fill 100% all the way around)

    Surf tab around 85%, wakeplate 0-10%



    Sent from my SM-N960U using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  5. #5

    Default

    Quote Originally Posted by larry_arizona View Post
    What are your pitch and roll numbers?


    Sent from my iPhone using Tapatalk
    I will admit that I forgot to get yesterday when I was out.

  6. #6
    Join Date
    May 2018
    Posts
    4,928

    Default

    Does your Autowake surf presets not give a good wave?


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  7. #7
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    Fill all bags to 100%, then engage autowake. Move passengers to surf side and watch Autowake to see where it’s wanting to take water out. Move people to the opposite location.

    In my Craz I have upgraded bags and 500lb of lead at mid/rear location on both sides.

    At 250lbs you can still surf, but really you need more ballast. I’d also recommend adding a 400 or 700lb bag on the surf side towards the rear. I’m 210, so I know the need for extra ballast.


    Sent from my iPad using Tapatalk
    2017 Moomba Craz

  8. #8

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Big guy here

    Speed is good....Fill front and surfside 100%, non-surf 85%.

    (Ideally get some lead so you can fill 100% all the way around)

    Surf tab around 85%, wakeplate 0-10%



    Sent from my SM-N960U using Tapatalk

    NICE Wave! thanks for the reply I will try that this weekend

  9. #9

    Default

    no its short and decent height not much push

  10. #10
    Join Date
    May 2018
    Posts
    4,928

    Default

    Quote Originally Posted by miltonbradley View Post
    no its short and decent height not much push
    Push seems to be greatly increased with more ballast and displacement.

    Key is to find your pitch and roll that gives you a good shape and clean wave, use minimal wake plate (I only tweak wakeplate slightly if I lose my pitch mid session), once you have that figured out, add lead midship to increase push with displacement.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •