Results 21 to 30 of 93
Thread: Ragboy’s surf setup tutorial
-
06-06-2020, 12:16 PM #21
You don't say if you have a Moomba or Supra, but just Google "Moomba (or Supra) Autowake tutorial video". They put out a 3 part series on Autowake.
That said, I can't get Autowake to keep my ballasts full and achieve pitch and roll numbers, yet I can achieve them manually with full ballast and Autowake off.
Sent from my SM-G950U using Tapatalk2019 Supra SL450
-
06-06-2020, 03:48 PM #222021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-06-2020, 04:16 PM #23
It shouldn't be dumping ballast at all, since I achieve pitch and roll manually without changing anything.
When I have Autowake on for me, 9.2 pitch and -1.5 roll, 100% amplitude, it dumps 50% from the non-surf side and almost 100% from the center. I have 850 lbs of lead pretty evenly distributed throughout the boat, but biased toward the rear. There is no reason for it to be dumping as much as it does.
Sent from my SM-G950U using Tapatalk2019 Supra SL450
-
06-06-2020, 04:20 PM #24
Yeah something is up. The most I lose it 8-9%
Maybe try a Recalibration?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-06-2020, 04:25 PM #25
-
06-06-2020, 04:54 PM #262021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-06-2020, 05:53 PM #27
-
06-06-2020, 08:51 PM #28
So you fill ballast 100% and then turn on Autowake at idle and it dumps 50% out of non surf side and 100% front?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-06-2020, 08:58 PM #29
-
06-06-2020, 11:43 PM #30