Front Ballast Makai

[Max20]

Well, thanks for pointing me in the direction for the access hole, I already had it covered with junk and didn’t even realize it was there.

The vent or overflow line wasn’t hooked up to the bag...simple fix!

08A9100E-1737-4A59-B2BD-7C2C08877BD2.jpg

[z28ke]

Well, thanks for pointing me in the direction for the access hole, I already had it covered with junk and didn’t even realize it was there.

The vent or overflow line wasn’t hooked up to the bag...simple fix!

08A9100E-1737-4A59-B2BD-7C2C08877BD2.jpg

Easy enough, glad you got it taken care of!

[HFarr]

Anyone know how to bleed the air out of the front Makai bag? I see the air vents on the two back bags. By the way they had a lot of air in them. I purged them filled them tight again, then next time I emptied and refilled, the air was right back again! Any thoughts?

Sent from my moto z4 using Tapatalk

[HFarr]

Here is a video of me venting the air out of one of my rear bags. This is after the pumps filled it, shut off, and I rand them some more until water came out of the overflow. I was able to fill it more after venting too. Built like I said, when I drained them and filled again, air was right back in there. Also when I drain them, there is always some water left in the bottom. Probably 4" worth. I ran the pumps more, but it just won't suck it all out.

https://youtu.be/JvPQ9EbPzy0

Sent from my moto z4 using Tapatalk