Results 1 to 9 of 9
Thread: A3 Tower lights
-
05-18-2020, 02:09 AM #1
A3 Tower lights
I am looking to put some LED lighting on tower for evening surfing, trying to find what looks good or works with the A3 tower. Not much out there that I can find.
What lights are you buying? Monster Tower seems to be the best option I can find. Any pics?2019 Mojo
4360# ballast (1280 exact fits + 600lbs lead)
Wetsounds Rev 10's w/Exile 12"sub
2009 Outback V (Sold)
3000# ballast, full Exile, Surf Tabs
-
05-18-2020, 09:14 AM #2
I put on a pair of led spot light kinda like these.
AMBOTHER LED Pods Light Bar 4-Inch 120-watt 12800-lumen Driving Fog Off Road Lights Triple Row Waterproof Spot Flood Combo Beam LED Cubes Lights for Pickup Truck Jeep ATV UTV SUV Boat, 2 Pack https://www.amazon.com/dp/B07KB56QG7..._KOOWEbNMZPAH2
Sent from my iPad using Tapatalk2017 Moomba Craz
-
05-18-2020, 01:20 PM #3Junior Member
- Join Date
- May 2020
- Location
- Little Rock
- Posts
- 6
Are you guys allowed to Surf in the dark? Against the law in my state. 30 min before sunrise, 30 min after sunset is the rule. I want to live where you are.....LOL
C. Andrews
2004 Moomba Outback LSV
-
05-19-2020, 04:03 PM #4Senior Member
- Join Date
- Sep 2017
- Posts
- 232
I got a pair of these installed on my tower if you are in Canada:
https://www.princessauto.com/en/deta...it/A-p8799405e2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
05-20-2020, 10:13 AM #5
I am up north. Got a pic of what they look like on the tower?
Sent from my iPhone using Tapatalk2019 Mojo
4360# ballast (1280 exact fits + 600lbs lead)
Wetsounds Rev 10's w/Exile 12"sub
2009 Outback V (Sold)
3000# ballast, full Exile, Surf Tabs
-
05-20-2020, 11:01 AM #6Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Yeah, I can pop a couple pics tonight. Some notes on my install:
1) 1.6A each...so 2(or 3 max) of them on the 5A Accessory fuse.
2) Leveraged the in tower wiring that is dead-ended at the base of the tower(just ran the cable to an under dash accessory terminal)
3) I had 4 installed on my old Mondo(2 forward facing and 2 rear facing)
a. This overloaded the 5A fuse...as my draw was 6.4A
b. I actually didn't like the forward facing lights.
4) On the old install I ran 3/4" self tapping screws....this time around I ran a 5/16 stainless bolt(3.5" or something I can't rememember) through the top holes in the tower and sealed with rubber washers and a nylon lock nut down below.(Downside was you couldn't hug them super tight to tower speakers)2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
05-20-2020, 11:34 AM #7
Great, thanks for the insight! I’ll probably pick some up this week.
Sent from my iPhone using Tapatalk2019 Mojo
4360# ballast (1280 exact fits + 600lbs lead)
Wetsounds Rev 10's w/Exile 12"sub
2009 Outback V (Sold)
3000# ballast, full Exile, Surf Tabs
-
05-31-2020, 11:52 PM #8Junior Member
- Join Date
- Apr 2020
- Posts
- 14
Were you able to get any pics yet?
-
06-01-2020, 10:46 AM #9Senior Member
- Join Date
- Sep 2017
- Posts
- 232
2022 SA450
2019 Mojo
2017 Mondo - SOLD