large brace in front of the engine.

[lowpressure]

Hello All,

I just purchased a 2003 moomba mobius with the mid engine. Im pulling the engine in the morning and while prepping I noticed that the large brace in front of the engine had a good bit of corrosion on it. I was unable to find one in any literature for sale. I have 3 welders and tons of fab skills but time is of the essence on this one so i dont want to have to make it if i dont have to. any help is appreciated.\

thanks
steve

[Stazi]

A picture of what you’re talking about would be amazing.


Sent from my iPhone using Tapatalk

[lowpressure]

ok, just got back inside from pulling the engine. These are so much easier to work on than inboard/outboards that im used to. Ill post a pic tomorrow when its daylight.

[lowpressure]

CDE08248-808C-4E57-AE3F-94E0ABE8FABA.jpg

Sent from my iPhone using Tapatalk

Here’s a picture. Appears to just be a brace.

[james yarosz]

I believe thats the mount for the center pole thats used for pulling skiers.If your boat has a tower someone may have removed it.

[Stazi]

Ski pole mount. Did your boat not have a ski pole when you bought it?


Sent from my iPhone using Tapatalk

[lowpressure]

yep. no ski pole just the tower when i got it. the previous owner has since been called and he found the pole in the garage. im still rebuilding the brace for it since it had a significant amount of rust at the bottom. thanks for the replies