Results 1 to 7 of 7
-
05-16-2020, 01:58 AM #1Junior Member
- Join Date
- May 2020
- Posts
- 6
large brace in front of the engine.
Hello All,
I just purchased a 2003 moomba mobius with the mid engine. Im pulling the engine in the morning and while prepping I noticed that the large brace in front of the engine had a good bit of corrosion on it. I was unable to find one in any literature for sale. I have 3 welders and tons of fab skills but time is of the essence on this one so i dont want to have to make it if i dont have to. any help is appreciated.\
thanks
steve
-
05-16-2020, 05:43 PM #2
A picture of what you’re talking about would be amazing.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-16-2020, 11:04 PM #3Junior Member
- Join Date
- May 2020
- Posts
- 6
ok, just got back inside from pulling the engine. These are so much easier to work on than inboard/outboards that im used to. Ill post a pic tomorrow when its daylight.
-
05-17-2020, 10:22 AM #4Junior Member
- Join Date
- May 2020
- Posts
- 6
CDE08248-808C-4E57-AE3F-94E0ABE8FABA.jpgHere’s a picture. Appears to just be a brace.
-
05-17-2020, 10:46 PM #5
I believe thats the mount for the center pole thats used for pulling skiers.If your boat has a tower someone may have removed it.
jy
-
05-18-2020, 08:37 AM #6
Ski pole mount. Did your boat not have a ski pole when you bought it?
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-23-2020, 10:52 PM #7Junior Member
- Join Date
- May 2020
- Posts
- 6
yep. no ski pole just the tower when i got it. the previous owner has since been called and he found the pole in the garage. im still rebuilding the brace for it since it had a significant amount of rust at the bottom. thanks for the replies