Results 1 to 4 of 4
-
05-08-2020, 09:08 AM #1
Looking for Blue LED ring for wetsound REV10
Hello!
Looking to add blue LED ring to my REV 10 tower speaker (2X).
Seems like to are no longer available and replaced by RGB ones,
Anyone here know where I can get them or have blue ring and want to change for RGB? Must be willing to send via USPS to Canada?
PM me!
Thanks !CRAZ 2018!
OBV 2008 Gone
-
05-08-2020, 09:45 AM #2
Maybe not the answer your looking for but you can wire the the RGB rings to just be blue.
Also, there is a WetSounds Tech Tips Facebook group that is a great resource and the WS guys respond pretty quickly.
Sent from my Note9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
05-08-2020, 10:38 AM #3
thanks for the advise,
CRAZ 2018!
OBV 2008 Gone
-
05-08-2020, 10:59 AM #4
Yes, you just wire up the strips' B+ and blue wire to just have single color blue. However, I suggest running a 4-conductor to the pods and go a head and wire all 3 colors up there, then once at the other end, just wire the blue color. This way if you or the next owner wants the multi-color, its as simple as wiring in the controller.