Results 11 to 15 of 15
Thread: Fc5-u mounting question
-
04-08-2020, 01:02 PM #11
Sent from my iPhone using Tapatalk
-
04-11-2020, 01:38 PM #12Senior Member
- Join Date
- Mar 2017
- Location
- Middle TN
- Posts
- 232
Are you guys putting the quick clips (red/black) in the pod or are they outside of the pod? Are you using heat shrink tubing to give a cleaner look to exposed wires?
'18 mojo
-
04-11-2020, 01:52 PM #13
I cut my connectors off and hard wired the speakers so there was no chance of water getting into the wiring and then also used 3/8” wire loom to cover the wire from the tower to the mount.
I don’t plan on removing my speakers for any reason. That’s why I chose to hardwire them in.
You can do either way, it will be fine. I just liked the nice clean look of no connection
Sent from my iPhone using Tapatalk
-
04-12-2020, 07:28 PM #14I cut my connectors off and hard wired the speakers so there was no chance of water getting into the wiring
-
04-13-2020, 01:07 PM #15Senior Member
- Join Date
- Jul 2016
- Posts
- 116
Fc5-u mounting question
I mounted my Rev 10’s directly to the tower. Saved a little head room. I drilled an extra hole in the tower plate, then used thick weather stripping between the speaker mount and the plate.
Sent from my iPhone using Tapatalk2016 Moomba Craz
2014 Chaparral H2O 21 Sport
1997 Sea Ray 175 Sport