Results 1 to 7 of 7
Thread: 2018 moomba craz
-
04-28-2020, 04:24 PM #1Member
- Join Date
- Jun 2018
- Posts
- 52
2018 moomba craz
we have the factory 3k ballast. I'm picking up 600 lb of lead bags weighing 50 lb each. Any recommendations on placement?
Last edited by Sickpainter; 04-28-2020 at 04:29 PM.
-
04-28-2020, 05:31 PM #2Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
With everything else being factory, I'd put 200 under each side seat in the rear, and 200 up front (mine up front is in the walk through under the center seat cushion). Thatbkight be a touch front heavy. Keep it even left to right.
From there move bags front to back to meet desired pitch with wake plate at zero. Zero wake plate (center plate, not surf tabs) is always my goal.
Sent from my SM-G973U using Tapatalk2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
04-28-2020, 05:33 PM #32017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
04-28-2020, 05:39 PM #4Member
- Join Date
- Jun 2018
- Posts
- 52
-
04-28-2020, 05:40 PM #5Member
- Join Date
- Jun 2018
- Posts
- 52
Also do you guys leave the lead in there or take it out traveling
-
04-28-2020, 05:59 PM #6
I personally leave it in, most do, unless it's over 1000 lbs.
Sent from my Note9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
04-28-2020, 06:09 PM #7Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
I leave my 500lbs in towing. You definitely know its back there!
Sent from my SM-G973U using Tapatalk2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead