Results 1 to 6 of 6
Thread: Board Rack
-
01-25-2020, 08:35 AM #1Junior Member
- Join Date
- Oct 2019
- Location
- Kannaoilis, NC
- Posts
- 2
Board Rack
Question to the group I have a 2018 Moomba Max that came with stationary racks. I was looking at Roswell swivel clamp adapter below to make my existing rack swivel. Will this work?
https://www.wakemakers.com/roswell-s...p-adaptor.html2018 Moomba Max
-
01-25-2020, 12:43 PM #2Member
- Join Date
- Oct 2018
- Posts
- 32
I don't think so, if I remember correctly each side of the split section has 4 bolt holes in a square drill pattern in each. You can confirm by pulling them apart, just a few allen head bolts holding everything together.
2017 Moomba Helix
-
01-26-2020, 12:24 PM #3
The one you posted the link to doesn’t swivel. It only levels the swivel rack out. The square insert looks like what is one my 18 Craz. I was thinking there was 4 bolts, not two though.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
01-26-2020, 01:06 PM #4
Part numbers can be found here https://roswellmarine.zendesk.com/hc...17-Oct-18_.pdf
I believe you need C915-1160632019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
01-27-2020, 08:31 PM #5Junior Member
- Join Date
- Oct 2019
- Location
- Kannaoilis, NC
- Posts
- 2
Thanks for the information guys. These are on the way
https://www.roswellmarine.com/product/mag-swivel/2018 Moomba Max
-
01-28-2020, 12:58 AM #6Member
- Join Date
- Feb 2018
- Posts
- 40
Those MAG swivels will old directly to your tower and board rack. And the MAG swivels are awesome. No moving parts to break. Buttery smooth swiveling. Just a heads up, with new MAG swivels you will want to "slam" the to lock in the outward position the first few times. Don't hulk out on it by any means, push it out smoothly and try to just apply pressure the very first time. It may not lock. That's when you give it a nudge. They have some high density plastic that's meant to hold up over time. So an empty rack is light and may not click it into place. With boards on the rack you should be fine. Just an FYI, it's by design.