Results 1 to 7 of 7

Thread: STEREO PROBLEM

  1. #1
    Join Date
    Aug 2006
    Location
    Dayton, OH
    Posts
    28

    Default STEREO PROBLEM

    Has any one had problems with their Kenwood stereo turning off and on? My stereo seems have a short somewhere cause when it kicks off sometimes the gas gauge along with all other gauges loses power also. I looked under the dash and moved some wires and everything came back on. I have been told that the stereo problem might really be an amp problem. I have the Kenwood amp that came with the boat my local dealer said the amp is overheating, and going into protection mode. If so why would the stereo shut off? Im not an audio guy, and if anyone has any suggestions I would appreciate it.

  2. #2
    Join Date
    Aug 2004
    Location
    Lake Hickory, North Carolina
    Posts
    1,390

    Default

    That's the way a lot of amps are. The stereo should still be on, but because the output from the head runs through the amp, when the amp goes into protect mode. no sound.
    .
    The kenwood head unit, when volumn is turned way up, after a period will also cut in and out. Mine did until I found a good setting on the gains.
    .
    As far as the gas gage thing, beats me. I would not think they are related, but maybe. That sounds more of a grounding problem than being a stereo issue.

  3. #3
    Join Date
    Feb 2007
    Location
    tacoma
    Posts
    135

    Default

    have you checked to make sure that all of your battery connections are tight?

  4. #4
    Join Date
    Aug 2006
    Location
    Dayton, OH
    Posts
    28

    Default

    Does anyone know the size, make, and watts on the sub that comes from the factory for 2006 lsv. My boat is in storage and I bought It used at the end of summer. I want to upgrade my audio, and not sure what sub amp to buy.

  5. #5
    Join Date
    Aug 2004
    Location
    Lake Hickory, North Carolina
    Posts
    1,390

    Default

    I think I read 175W in another post, although that seems like an odd number.
    .
    B

  6. #6
    Join Date
    Aug 2006
    Location
    Dayton, OH
    Posts
    28

    Default

    Is it a 10" Kenwood?

  7. #7
    Join Date
    Dec 2006
    Location
    Thomasville, GA
    Posts
    198

    Default

    Factory is a 10" Kenwood. I'm replacing mine with a Rockford.

Similar Threads

  1. Yet Another Problem w/ 07 XLV GG
    By bradcraig78 in forum Service & Repair
    Replies: 5
    Last Post: 05-15-2007, 06:01 PM
  2. don't no my problem do you know
    By chummygyn in forum Service & Repair
    Replies: 1
    Last Post: 04-24-2006, 04:43 PM
  3. stering Problem
    By pcasey in forum Wakeboarding | Wakeskating
    Replies: 9
    Last Post: 07-28-2005, 03:04 PM
  4. Stereo remote problem
    By slalomski in forum Service & Repair
    Replies: 12
    Last Post: 04-27-2005, 02:04 PM
  5. problem
    By in forum General Chat
    Replies: 0
    Last Post: 06-30-2003, 06:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •