Results 1 to 5 of 5
-
10-29-2019, 06:53 PM #1Senior Member
- Join Date
- Sep 2017
- Posts
- 232
FAE Install Tips and Marina Storage
Hey guys,
I just bought a 2019 Mojo and looking to put an FAE Pipe on it this winter. Some questions:
1) Are Through-Bolts Mandatory in your opinion?
2) Any Tips with the Install?
3) Is there any worry about surf pipe and keeping your boat in the marina boat slip other than ensuring it is sealed properly?
Thanks!2022 SA450
2019 Mojo
2017 Mondo - SOLD
-
10-29-2019, 07:18 PM #2
Absolutely mandatory. Regular wood screws WILL rip out. The drag force in the exhaust is much higher than you think!
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
10-29-2019, 09:26 PM #3
Just follow the directions they give you from FAE, it wasn't hard but definitely took a couple hours. Most of the work was getting the baffle pipe out. Only installing the surf pipe would be a quick job. I would just do the through bolt, it's not that much more work and you get the peace of mind.
2016 Mojo surf edition
1100lbs rear w/ 475lbs piggyback mid/ center 700lbs/ 500lbs IBS/ 600 lbs lead
ACME 2315
-
10-30-2019, 10:00 AM #4
1. Yes do the through hull
2. Link attached of my install
3.No worry
I'm a FAE dealer and can help you with the purchase just send me a message.
https://forum.moomba.com/showthread....E-Install-PicsFAE Dealer Message me for a Discount!
2017 Moomba Mojo Surf Edition
4600LB Ballast- Enzo Bags & Lead
Fresh Air Exhaust
4 Rev 10 Tower Speakers
-
10-30-2019, 08:51 PM #5