Results 1 to 10 of 32
Thread: Water Pump Impeller Removal
-
10-28-2019, 05:31 PM #1
Water Pump Impeller Removal
Anyone have any good tips to remove the raw water pump impeller? They always seem to pull out hard, but I am really struggling to get it out this year. With all the smart engineers we have in this country you would think they could put a part that needs replace each year in a more accessible spot!
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
10-28-2019, 05:43 PM #2
Water Pump Impeller Removal
If you have cover off, spray impeller with WD40 then take need nose pliers and grab a rubber vane and wiggle it, work your way around in one direction grabbing a vane and wiggling, it eventually pops free
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
10-28-2019, 08:48 PM #3
WD40 soak. Then bumped the motor a few times. Came right out with needle-nose pliers on my SL.
Yea, weird spot with th a plastic cover back there.
Sent from my P00I using TapatalkLast edited by MJHSupra; 10-28-2019 at 08:54 PM.
2018 Supra SL400
-
10-28-2019, 09:05 PM #4
-
10-28-2019, 09:06 PM #5
Good tip. Thank you. I got it out after some cussing and snorting. . It was really stuck in there this year. I have never had that much trouble getting it out. Maybe I am getting weaker. Ha ha.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
10-28-2019, 10:30 PM #6
Impeller puller tool.
-
10-28-2019, 10:39 PM #7
Didn’t even know they made one. Good to know! I am all about having the right tool for the job.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
10-29-2019, 12:29 AM #8
2 paint can openers to pry it out.
2019 Supra SL450
-
10-29-2019, 08:58 AM #9
https://www.discountmarinesupplies.c...BoCoYcQAvD_BwE
or you can buy the Jabsco one:
https://marinepumpdirect.com/jabsco-...BoCOP4QAvD_BwE2018 Supra SL550 with 850lbs of lead wake
2017 Supra SA400 (Sold)
2016 Moomba Mojo Surf Edition (Sold)
2017 Ford F250 Super Duty (Sold)
2019 Ford F250 Super Duty (Sold)
2021 GMC Denali 2500
Soulcraft Vodoo
Soulcraft Jordi Pro
Soulcraft Super AV
Phase Five Matrix
-
10-29-2019, 07:53 PM #10
Discount Marine @ $34 to $36 is a good deal. I assumed $100 for the tool.
Sent from my P00I using Tapatalk2018 Supra SL400