Results 1 to 5 of 5
Thread: Gear/Throttle Lever
-
03-07-2007, 07:32 PM #1Senior Member
- Join Date
- Dec 2006
- Location
- Thomasville, GA
- Posts
- 198
Gear/Throttle Lever
Here I am starting another thread with a question but where else can you get this quality feedback. My gear/throttle control seems to be hard to get into gear. Once it goes in it operates smoothly, just right at the beginning coming out of neutral. The selector on the transmission is also smooth and moves with ease. Can these be greased or is it in need of an adjustment? Anyone had this before?
-
03-07-2007, 10:24 PM #2
When I had this trouble it turned out to be a cable and when it was replaced it worked fine. Just my $0.02
-
03-08-2007, 10:57 AM #3
You can grease the ends that are exposed, extend the throttle one way, coat o grease, the other way , coat o grease, werk it a couple times. That may help. Also a small amt o grease on the connections and links.
.
Hope this helps
.
B
-
03-09-2007, 09:09 PM #4Senior Member
- Join Date
- Dec 2006
- Location
- Thomasville, GA
- Posts
- 198
I greased the ends up at the front like you said B. Works smooth as silk.
-
03-10-2007, 01:10 AM #5
Hell yeah!
.
B
Similar Threads
-
08 LSV....is it throttle by wire or cable?
By 2thdoc01 in forum Service & RepairReplies: 3Last Post: 04-24-2008, 04:38 PM -
Throttle cable problems with top speed?
By pcm2a in forum Service & RepairReplies: 9Last Post: 08-14-2007, 01:08 PM -
stiff throttle
By AZ_Calling in forum General ChatReplies: 10Last Post: 08-01-2005, 11:41 AM -
Throttle Lever
By mseidelch in forum Service & RepairReplies: 0Last Post: 07-17-2005, 01:26 PM -
Need Help with Throttle
By Wakeboard2222 in forum Service & RepairReplies: 5Last Post: 06-26-2004, 01:06 PM