Results 11 to 13 of 13
Thread: Ballast fitting leaks?
-
09-04-2019, 07:50 AM #11Senior Member
- Join Date
- Sep 2005
- Location
- Claytor Lake, VA
- Posts
- 598
Take an O-ring off, go to your local hardware store and match it up. I had some leaking issues and was going to replace O-rings but a little silicone lube took care of it.
2005 Mobius LSV
325 EFI
-
09-05-2019, 06:05 AM #12
I use a dab of white lithium grease on mine but silicone or Vaseline works too.
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
06-09-2020, 07:57 PM #13
Well I had enough of the leaks and went full throttle in sealing the fittings. I tried new o-rings on the bags with silicone grease and it still leaked. So I put a dab or bathroom silicone caulk on all the fittings, manifold to bags, pumps to port outs. I’ll probably regret that later this season when removing the bags but Im over the wet carpet. She goes out for a water test to tomorrow....