Results 1 to 7 of 7
  1. #1
    Join Date
    Oct 2017
    Posts
    12

    Default WTB Need a circuit board for 2002 Mobius

    Boat is at the nearest Moomba dealer and it needs the following parts:

    CIRCUIT BOARD 103403
    CIRCUIT BOARD BREAKER 103402

    Problem is due to the age - they arenít made any more.
    Is there a used market? Aftermarket replacement for these parts for my
    2002 Moomba Mobius LSV



    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Oct 2017
    Posts
    12

    Default


    Picture of the board


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    488

    Default

    Look for an electronics repair in your area. Probably just some broken solder joints.
    2005 Mobius LSV
    325 EFI

  4. #4
    Join Date
    Oct 2017
    Posts
    12

    Default

    That would be first choice if the boat were not 2.5 hours from my house each way.....

    Little disappointed the dealer hasnít offered this option.


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,157

    Default

    Good luck man - eBay maybe? Electronics/Car stereo repair shop perhaps.

    Or get them to hit each solder point themselves if you can't do it? Probably take 5 min tops. I once repaired an overhead DVD screen in my truck simply by remelting each point. I was shocked it actually worked.
    The years have been kind, it's the weekends that have done the damage.

    2001 MobiusV - Loaded with Ballast, Exile, Blood, Sweat & Beers

  6. #6
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    488

    Default

    I would get the boards and send them out myself. Doubt the dealer would want to be involved with that. Looks to be just power switching with minimal board level components. Should be easy to repair. Interesting they were manufactured by Hallicrafters which used to be big in radios.

    Here's a couple of options I found. There are tons of companies out there that repair circuit boards.
    https://www.galco.com/fix/Circuit-Board-Repair
    https://circuitboardmedics.com/about-us/
    2005 Mobius LSV
    325 EFI

  7. #7
    Join Date
    Oct 2017
    Posts
    12

    Default

    Spoke to Anthony at customer service at skierís choice and he was quite helpful in saying the board wasnít much more than a way to save wire in that year.
    He advised me and dealer to remove board, clean it, inspect for any damage to board - bits of solder that may be missing and repair as needed.
    Anthony reporter that in 20 years he had only seen 3 boards that had to actually be replaced - 1 due to physical breakage of the board and 2 where something short circuited and melted the board.

    Weíll see what the dealerís cleaning efforts render.
    If that doesnít work Anthony did say each circuit could be wired past the board directly.

    Will update...


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •