Results 1 to 5 of 5
Thread: Wet sounds mounted to oz tower
-
08-16-2019, 02:16 PM #1Member
- Join Date
- May 2017
- Posts
- 37
Wet sounds mounted to oz tower
I知 seeing if anyone has mounted there wet sounds on to the holes for a rack on the top part of the OZ tower. If anyone knows what I知 talking about prob not best description.
Sent from my iPhone using Tapatalk
-
08-16-2019, 02:19 PM #2
Looking to mount a tower pod to a board rack location?
-
08-16-2019, 02:21 PM #3Member
- Join Date
- May 2017
- Posts
- 37
Yes the top rack spot. There are holes but I never use them and don稚 need another rack.
Sent from my iPhone using Tapatalk
-
08-16-2019, 03:40 PM #4
Id not want them down that low, if I could avoid it. Next, getting wire into the pod. You would have to convert the pod to the rear located 4-way speakon connector. Again, if rather not want that. Lets say the hole lined up, I bet you would need to use a spacer or the TC3-SBASE mounts so the pod cleared the tower. Worst case, you have to fabricate an adapter that bolted to the tower holes, then the pod bolted to the adapter.
-
08-21-2019, 03:08 PM #5Member
- Join Date
- May 2017
- Posts
- 37
So I知 guessing nobody has tried it?!?
Sent from my iPhone using Tapatalk