Results 1 to 6 of 6
Thread: Chipped Board Repair
-
08-05-2019, 07:46 PM #1
Junior Member
- Join Date
- May 2016
- Location
- Idaho
- Posts
- 6
Chipped Board Repair
I chipped the nose of my Ronix Blender yesterday. What have y’all used to patch a chip in your boards before? Is there anything that’ll work at a store like Home Depot or Lowe’s? Thanks.
Sent from my iPhone using Tapatalk
-
08-05-2019, 08:03 PM #2
Senior Member
- Join Date
- May 2013
- Location
- Gainesville, GA
- Posts
- 141
So sorry to hear about your damage. I have used waterproof epoxy stick from Homedepot. Mix it up and fill the crack. It will be up to you if you want to sand it smooth. I'll past pictures when I get home tomorrow.
Sent from my SM-G960U using Tapatalk-Blaine
2019 Makai
2013 LSV (sold)
1997 Bayliner 1850 (sold)
-
08-05-2019, 09:47 PM #3
Junior Member
- Join Date
- May 2016
- Location
- Idaho
- Posts
- 6
Thank you very much!
Sent from my iPhone using Tapatalk
-
08-06-2019, 09:33 AM #4
Senior Member
- Join Date
- May 2016
- Location
- Fargo, ND
- Posts
- 127
Solarez UV Cure Epoxy Ding Repair Resin - SUP Paddle-board & Surfboard Repair (0.5 oz) Cures in 2-3 Mins! Non Yellowing, eco-Friendly - ZERO Vapors, Comes with 60/240 Grit Sand Pad ~ Made in the USA! https://www.amazon.com/dp/B00MGUMLE0..._CfysDbXPND435
I keep one of these in the boat for small quick fixes.
Sent from my iPhone using Tapatalk2016 Mojo
-
08-06-2019, 10:03 AM #5
Senior Member
- Join Date
- Feb 2017
- Location
- Colorado
- Posts
- 255
X2 for Solarez. Very easy, doesn’t take much product or time for it to cure.
-
08-13-2019, 02:18 PM #6
Senior Member
- Join Date
- May 2013
- Location
- Gainesville, GA
- Posts
- 141
Sorry for the delay.
Sent from my SM-G960U using Tapatalk-Blaine
2019 Makai
2013 LSV (sold)
1997 Bayliner 1850 (sold)
Reply With Quote