Results 1 to 6 of 6
  1. #1
    Join Date
    May 2016
    Location
    Idaho
    Posts
    6

    Default Chipped Board Repair

    I chipped the nose of my Ronix Blender yesterday. What have y’all used to patch a chip in your boards before? Is there anything that’ll work at a store like Home Depot or Lowe’s? Thanks.


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    May 2013
    Location
    Gainesville, GA
    Posts
    100

    Default

    So sorry to hear about your damage. I have used waterproof epoxy stick from Homedepot. Mix it up and fill the crack. It will be up to you if you want to sand it smooth. I'll past pictures when I get home tomorrow.

    Sent from my SM-G960U using Tapatalk
    -Blaine

    2019 Makai
    2013 LSV (sold)
    1997 Bayliner 1850 (sold)

  3. #3
    Join Date
    May 2016
    Location
    Idaho
    Posts
    6

    Default

    Thank you very much!


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    May 2016
    Location
    Fargo, ND
    Posts
    120

    Default

    Solarez UV Cure Epoxy Ding Repair Resin - SUP Paddle-board & Surfboard Repair (0.5 oz) Cures in 2-3 Mins! Non Yellowing, eco-Friendly - ZERO Vapors, Comes with 60/240 Grit Sand Pad ~ Made in the USA! https://www.amazon.com/dp/B00MGUMLE0..._CfysDbXPND435

    I keep one of these in the boat for small quick fixes.


    Sent from my iPhone using Tapatalk
    2016 Mojo

  5. #5
    Join Date
    Feb 2017
    Location
    Colorado
    Posts
    168

    Default

    X2 for Solarez. Very easy, doesn’t take much product or time for it to cure.

  6. #6
    Join Date
    May 2013
    Location
    Gainesville, GA
    Posts
    100

    Default

    Sorry for the delay.

    Sent from my SM-G960U using Tapatalk
    -Blaine

    2019 Makai
    2013 LSV (sold)
    1997 Bayliner 1850 (sold)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •