Results 1 to 9 of 9
Thread: Prop shaft question
-
05-25-2020, 09:42 AM #1Junior Member
- Join Date
- May 2020
- Posts
- 29
Prop shaft question
I'm coming from a Mastercraft so used to a splined shaft, but wondering if this looks right? The key has grooved into the strut a little if you look closely.
Sent from my SM-N970U using Tapatalk
-
05-25-2020, 10:18 AM #2
That is not right at all. Whoever installed the prop did not seat the key in the shaft and prop correctly. You need to fix that IMMEDIATELY. Do not use it like that!
Sent from my iPad using Tapatalk2017 Moomba Craz
-
05-25-2020, 11:17 AM #3Junior Member
- Join Date
- May 2020
- Posts
- 29
-
05-25-2020, 12:49 PM #4
Correct. It should be straight. I can see the key has already carved a groove into the strut. Nothing that affects its integrity but good you noticed it and corrected it. WHoever installed it does not have a clue what they were doing.
2020 Supra SL 400
2015 Moomba Mojo(Sold)
2018 Yamaha Waverunner(Just to fool around)
2018 F150 Lariat
sport edition, 3.5lt ecoboost
-
05-25-2020, 12:58 PM #5Junior Member
- Join Date
- May 2020
- Posts
- 29
-
05-25-2020, 01:03 PM #6
https://www.bakesonline.com/prop-key...xoCqvwQAvD_BwE
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
05-25-2020, 01:04 PM #7Junior Member
- Join Date
- May 2020
- Posts
- 29
-
05-25-2020, 01:07 PM #8
https://youtu.be/Id9vntgmGMI
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
05-26-2020, 08:23 AM #9
Kent, nice vid!
Sent from my iPhone using Tapatalk2017 Moomba Craz