Results 1 to 4 of 4
Thread: Depth Indicator on the fritz
-
07-08-2019, 07:18 PM #1
Depth Indicator on the fritz
Looking for advice on my depth indicator in my 2014 Moomba Mojo. I would like to trouble shoot issues I am having to determine if the issue is with the gauge or sending unit.
The gauge powers on, but has no reading and displays dashes.
It has an in hull transducer but I can’t tell if it is the kind that is installed and sits in a small reservoir of fluid.
Can anyone shed some light.
JMF
Sent from my iPad using Tapatalk
-
07-08-2019, 08:25 PM #2
Pretty easy to tell if it's the resi type. You can remove the transducer by rotating a collar counter clockwise.
Glue downs look like a hockey puck with a wire molded into them.
-
08-05-2019, 06:57 AM #3Junior Member
- Join Date
- May 2019
- Posts
- 11
Just had to glue my transducer back down. All good now
-
08-06-2019, 09:52 AM #4
Excellent.
Thanks for the closure.