2018 SA, factory ballast.

Fill time settings:
7:30 fill time for rears and 9:00 center

I started noticing I start spilling water out of ballast vents earlier and earlier.

My assumption is my drain time needs to be increased and each time I drain, I am leaving more and more water in the ballast tanks, therefore my fill times are off more each time.

Even with the bag overflows running, I pushed one of the rear engine dividers out of place. It popped right back in, but it tells me I am way overfilling the bags.

I pulled boat out of water and noticed I could drain an additional 60 seconds worth of water before the pumps started spitting air.

Is adding an additional 60 seconds on the drain timer the right approach?



Sent from my iPhone using Tapatalk