Results 1 to 3 of 3
Thread: Gravity III Forward Ballast Sac
-
06-14-2019, 06:19 PM #1
Gravity III Forward Ballast Sac
I have the 1180 bag in my 2006 front locker which isn’t vented from the factory. The bag has a fill and drain port at the rear and one drain up front. My question is can I flip the bag over and use that front drain as a vent? I notice a lot of air in the bag when filling.
-
06-15-2019, 08:22 AM #2
That would probably work for filling, but I assume you would create another issue during draining.
Sent from my P00I using Tapatalk2018 Supra SL400
-
06-19-2019, 09:46 AM #3
It actually worked. The drain and fill on the back side are the same height. I filled the front bag and it only fills half way because there is no vent. Opened the drain up front and I was able to fill it all the way up. I can’t believe these things weren’t vented at the factory.