-
Gravity III Forward Ballast Sac
I have the 1180 bag in my 2006 front locker which isn’t vented from the factory. The bag has a fill and drain port at the rear and one drain up front. My question is can I flip the bag over and use that front drain as a vent? I notice a lot of air in the bag when filling.
-
That would probably work for filling, but I assume you would create another issue during draining.
Sent from my P00I using Tapatalk
2018 Supra SL400
-
It actually worked. The drain and fill on the back side are the same height. I filled the front bag and it only fills half way because there is no vent. Opened the drain up front and I was able to fill it all the way up. I can’t believe these things weren’t vented at the factory.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules