Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2018
    Location
    Phoenix AZ
    Posts
    34

    Default Gravity III Forward Ballast Sac

    I have the 1180 bag in my 2006 front locker which isnít vented from the factory. The bag has a fill and drain port at the rear and one drain up front. My question is can I flip the bag over and use that front drain as a vent? I notice a lot of air in the bag when filling.

  2. #2
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    1,270

    Default

    That would probably work for filling, but I assume you would create another issue during draining.

    Sent from my P00I using Tapatalk
    2007 Supra SSV 22'

  3. #3
    Join Date
    Dec 2018
    Location
    Phoenix AZ
    Posts
    34

    Default

    It actually worked. The drain and fill on the back side are the same height. I filled the front bag and it only fills half way because there is no vent. Opened the drain up front and I was able to fill it all the way up. I can’t believe these things weren’t vented at the factory.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •