Results 1 to 8 of 8
Thread: V2 or oz/ozHD
-
06-13-2019, 10:06 PM #1Member
- Join Date
- Jul 2016
- Posts
- 41
V2 or oz/ozHD
looking for a new tower for my 2009 mobius. have a crappy aerial tower now. not happy with it . its rickity and flexes a lot. looking for a more modern looking, foward leaning tower like V2/oz
any one know where i can get one of these towers? or any one have a recomendation for a solid aftermarket tower?2009 moomba mobis
working on ballast system
working on a surf setup
1992 ski nautique (dont hate)
-
06-14-2019, 11:01 AM #2
I had mine made for an older outback. Made a drawing of what I wanted and $2000 later done. However mine is the normal style but stronger than most Alu toweres
Web.
1997 Outback and stopped looking
-
06-14-2019, 03:26 PM #3
-
06-14-2019, 09:30 PM #4Member
- Join Date
- Jul 2016
- Posts
- 41
not sold on the way the roswel tower looks/mounts
2009 moomba mobis
working on ballast system
working on a surf setup
1992 ski nautique (dont hate)
-
06-16-2019, 06:50 AM #5Member
- Join Date
- Jul 2016
- Posts
- 41
Bump to the top
2009 moomba mobis
working on ballast system
working on a surf setup
1992 ski nautique (dont hate)
-
06-09-2021, 12:43 PM #6Member
- Join Date
- Jul 2016
- Posts
- 41
Still looking
2009 moomba mobis
working on ballast system
working on a surf setup
1992 ski nautique (dont hate)
-
06-09-2021, 12:54 PM #7
-
06-09-2021, 10:54 PM #8
I had that same tower on a Crownline I owned. Nice solid beefy tower and looked good. Only thing I did not like was the pain it was to unscrew the knobs through the spherical rod end bearings in order to fold the tower. Getting them lined back up on mine was a bit aggravating. Always had to apply pressure to the tower to get them to line up just right.
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub