Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    16

    Default Mojo pro with Wetsounds Rev 10’s

    Just a quick question that hopefully someone can answer.
    I have a 2017 Mojo Pro with the wetsounds tower speakers.
    I was looking to get the wetsounds led rings for those speakers.
    Is the tower and speakers already pre-wired for those led’s or do I also have run wires and switches?
    And if it is pre-wired do the led lights just come on when the interior lights are turned on or are they always on?

    Thanks

  2. #2
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    So from I saw on the Supra and moms boat owners Facebook page the tower is prewired for lights so you can the speaker rings in one solid color (depending on what ground you connect from RGB strip). If you want full RGB capabilities you will need to run RGB wires to the tower and purchase an RGB controller. This is what I did.


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •