Results 1 to 9 of 9
  1. #1
    Join Date
    Aug 2018
    Posts
    18

    Default How to test swell tabs

    Anyone know how to, or If one can, engage or deploy the swell tabs when the boat is not moving, like on the trailer to test them? I'm trying to troubleshoot why my swell tabs don't work. I can do the center tab, but not sure about the swell tabs. 2015-17 Supra models

    Sent from my SM-G965U using Tapatalk

  2. #2
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    You should be able to turn on the surf system to one side and it will instantly deploy the opposite tab.

    I.e. if you select surf left, it should deploy the right tab immediately.


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  3. #3
    Join Date
    Aug 2018
    Posts
    18

    Default

    Thanks, have you done this while the boat is not moving? The warning states that the cruise must be active between 9-12mph.

    Sent from my SM-G965U using Tapatalk

  4. #4
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    Quote Originally Posted by Boatlaunch View Post
    Thanks, have you done this while the boat is not moving? The warning states that the cruise must be active between 9-12mph.

    Sent from my SM-G965U using Tapatalk
    I was looking for this info too, thought the plate only moved after reaching a certain speed.

    There's a dealer section in the settings, I've been trying to guess the code on/off hoping it would have a diagnostic screen.
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  5. #5
    Join Date
    Aug 2011
    Location
    Commerce Lake, MI
    Posts
    2,145

    Default

    On the Moombas it activates immediately and does not require a certain speed to deploy.


    Sent from my iPhone using Tapatalk
    2017 Moomba Craz

  6. #6
    Join Date
    Oct 2016
    Location
    Tims Ford Lake TN
    Posts
    453

    Default

    I'd guess the Supras are same, not sure: On my Mojo the actuators go through a start-up sequence of movement when the key goes to the run position. You don't have to even crank it while its on the trailer. Just have someone move the key while you watch on the ground.
    2016 Mojo Surf
    Raptor 400
    1100 rear bags / 500 IBS / 600 LeadWake
    Exile amps/tower - Kicker in-boat
    FAE

  7. #7
    Join Date
    Aug 2017
    Posts
    1,382

    Default

    I believe there is a dealer code that can get you into this mode. I don’t know it, but someone probably does?


    Sent from my iPhone using Tapatalk

  8. #8
    Join Date
    Aug 2018
    Posts
    18

    Default

    I found the problem. This breaker was off, so no power to some of the toggles, the swell plates, and the steering column cruise adjust. The swell plates do adjust now from the screen, with the boat on the trailer. I can't believe I didn't check this earlier.

    Sent from my SM-G965U using Tapatalk

  9. #9
    Join Date
    May 2018
    Posts
    4,920

    Default

    I recall during my dealer delivery, he showed me the breakers and said if anything stops working, check breakers first.

    Glad it was simple.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •