Results 1 to 10 of 10
  1. #1
    Join Date
    Apr 2017
    Location
    Mandeville, LA
    Posts
    8

    Default Lead weight placement for 2017 Mojo

    I now have 500 lbs of lead and trying to figure where to put them all so I donít have to move them around.
    I have both goofy and regular surfers.
    I currently have a 2017 Mojo surf edition with the stock 3000 lbs.
    900ís in rear, 700 in middle and 500 in bow.
    Thanks for any advice
    🤙🏽

  2. #2
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    764

    Default Lead weight placement for 2017 Mojo

    I am also adding 500lbs to my 2017 mojo, although I have the Enzo sacs in the rears. I have been told the lead should all go in the bow, but I havenít tried it yet.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  3. #3
    Join Date
    Apr 2017
    Location
    Mandeville, LA
    Posts
    8

    Default

    How big are the enzoís? Maybe Iíll
    Put some in back and bow.

  4. #4
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    764

    Default

    The Enzo sacs are 1450 each. They fill the rear compartments almost completely.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  5. #5
    Join Date
    Apr 2017
    Location
    Mandeville, LA
    Posts
    8

    Default

    No issues with the panel bending? Mine has with the 900lbs

  6. #6
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    5,967

    Default

    An alternate to the enzos is to use two of the standard 400 lb bags under the cabin seats and just using a tsunami pump to fill and drain them. This is what I do and when the bags are empty I just put stuff on top of them when I need that space for storage and just use the 900s in the rear. I only have 200 lbs of lead and am moving it all over all the time but when we surf (goofy) I usually put two behind the driver seat and one on either side of the v-drive cover.
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420.

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  7. #7
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    764

    Default

    Quote Originally Posted by Springmann View Post
    No issues with the panel bending? Mine has with the 900lbs
    No, but my boat came with the metal supports on the panels. Does yours not have those? Otherwise, wakemakers has the aftermarket panel support kit you can add to strengthen them.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  8. #8
    Join Date
    Apr 2017
    Location
    Mandeville, LA
    Posts
    8

    Default

    Yes it has metal. It bends and popped one of those blots already

  9. #9
    Join Date
    Apr 2018
    Location
    Texas
    Posts
    244

    Default

    Quote Originally Posted by Springmann View Post
    Yes it has metal. It bends and popped one of those blots already
    The 1100ís I had did the same thing. But the Enzoís IMO fit much better and donít bulge the sides. As far as the lead is concerned I ran 250 in the bow and 250 on the surf side made the wave much longer but also had to watch for rollers a lot more


    Sent from my iPhone using Tapatalk
    2015 Mojo
    2005 Yamaha at-230 sold
    2012 Ram 2500 tow rig

  10. #10
    Join Date
    Jan 2014
    Location
    Canby, OR
    Posts
    61

    Default

    Quote Originally Posted by Edo88 View Post
    The 1100ís I had did the same thing. But the Enzoís IMO fit much better and donít bulge the sides. As far as the lead is concerned I ran 250 in the bow and 250 on the surf side made the wave much longer but also had to watch for rollers a lot more


    Sent from my iPhone using Tapatalk
    I have the Wakemakers Custom Fit Bags (1475# or so) and they eventually sheared off the plastic C-channel that the engine panels slid into at the floor. Side note, I re-purposed a Wakemakers engine divider panel saver kit I had laying around by using the aluminum C-channel in the kit to replace the plastic channel that came stock with the boat. Worked great, C-channel is the perfect size.
    2017 Mojo
    2005 Moomba XLV (sold)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •