Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2018
    Posts
    4

    Default Spark plugs, wires, and cap

    Looking to tackle this project in the next day or two. Have the 340hp 5.7 catted motor. Looking for any tips/tricks and what tools may help the job along. I saw a few days ago the order for the coils to each plug from the cap but cannot seem to find it again. Thanks for any info ahead of time!


    Sent from my iPhone using Tapatalk

  2. #2

    Default

    I did this a few months ago on the same engine. Relatively straight forward to be honest. One the acres holding the distributed on can be a little awkward to get to. You have thread the cables under the intake cover on the stbd side of the engine but that’s also easy enough. As for the numbers I just taped and labelled them before removing them.
    '07 LSV
    340 EXT CAT SS
    Probably the only one in the UK
    [/SIGPIC]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •