Results 31 to 40 of 64
Thread: Ladder for Moomba Max?
-
08-16-2019, 09:42 AM #31
-
12-06-2019, 06:50 PM #32Senior Member
- Join Date
- Jan 2015
- Location
- Live: OP, KS...Boat: Shell Knob, MO
- Posts
- 167
-
12-07-2019, 10:04 AM #33
Somebody on here mounted one on a newer SE. Reported no effect on wake or wave.
Sent from my P00I using Tapatalk2018 Supra SL400
-
12-07-2019, 12:24 PM #34David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
12-07-2019, 04:23 PM #35
-
08-16-2020, 12:45 PM #36Senior Member
- Join Date
- Mar 2020
- Posts
- 127
Old thread - I ordered one of the ladders off Amazon - only $55. Just confirming those that have installed the 1-1/4 long screws are fine to use? Just want to make sure they’re not too long.
Anyone care to share diameter of drill bit used for pilot holes?
I did buy some 5200 btw - nice touch for whoever thought of that
-
08-17-2020, 03:01 PM #37
also following. what's the weight capacity of those and any issues with it pulling out? want to install but really don't want to thrubolt.
will the 1 1/4 screws hold with a 250lb person trying to seal up on the platform?'06 Supra Launch 20SSV-gone but never forgotten
-
08-18-2020, 01:29 AM #38
-
08-18-2020, 02:47 PM #39
So far mine is still holding strong with just the screws and no 5200. We have probably had 250 lbers use it as well.
Sent from my iPhone using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
08-18-2020, 03:56 PM #40Senior Member
- Join Date
- Mar 2020
- Posts
- 127
Care to share what size drill bit you used to pre-drill the screw holes?