Results 1 to 7 of 7
  1. #1
    Join Date
    Sep 2018
    Location
    Eastern Long Island
    Posts
    75

    Default pop up ski pylon

    The pop up pylon on my 2018 Max pops up and down fine, but when in the up position it seems to be "locked" for lack of a better word. It does not rotate freely as I believe it should.
    Any ideas?
    2018 Moomba Max - 400 Raptor - 6 pump ballast - auto wake 2 - flow 2 - gps zero off

  2. #2
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    911

    Default

    ......Tow your boarders from the tower.

    Your Max doesn't really want to pull a tube

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf MAX Edition
    Flow 2.0 Surf System w/ AutoWake™
    4,600 Lbs Ballast - Enzos + Lead
    Wet Sounds REV10s + REVO12-XXX

  3. #3
    Join Date
    Sep 2018
    Location
    Eastern Long Island
    Posts
    75

    Default

    Sometimes the kids like tubes, and sometimes someone wants to ski.
    At any rate it is more about having things work as they are intended.
    2018 Moomba Max - 400 Raptor - 6 pump ballast - auto wake 2 - flow 2 - gps zero off

  4. #4
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    911

    Default

    Quote Originally Posted by jimmsch View Post
    Sometimes the kids like tubes, and sometimes someone wants to ski.
    At any rate it is more about having things work as they are intended.
    Just messin with ya. Can you get to where the pylon retracts? Maybe a lil white lithium spray?

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf MAX Edition
    Flow 2.0 Surf System w/ AutoWake™
    4,600 Lbs Ballast - Enzos + Lead
    Wet Sounds REV10s + REVO12-XXX

  5. #5
    Join Date
    Aug 2015
    Location
    Mn
    Posts
    130

    Default

    To lower my pylon I lift, rotate counterclockwise and lower it, to raise it I lift and rotate clockwise and it locks in the up position. I do not believe it is supposed to rotate in the up position, or at least mine doesn't. It does not need to rotate since the loop of the rope spins freely within the pylons groove.
    2015 Moomba Mojo.
    400 ford raptor engine.
    Surf edition, 1450# Enzo's
    2018 Yamaha Waverunner(Just to fool around)
    2018 F150 Lariat
    sport edition, 3.5lt ecoboost

  6. #6
    Join Date
    Sep 2018
    Location
    Eastern Long Island
    Posts
    75

    Default

    It doesn't seem to be easy to get at, I have been spraying WD 40 on it.

    Shouldn't the rope go through the hole in the pop up and then wrap around rather than just loop over it?
    2018 Moomba Max - 400 Raptor - 6 pump ballast - auto wake 2 - flow 2 - gps zero off

  7. #7
    Join Date
    Aug 2015
    Location
    Mn
    Posts
    130

    Default

    Quote Originally Posted by jimmsch View Post
    It doesn't seem to be easy to get at, I have been spraying WD 40 on it.

    Shouldn't the rope go through the hole in the pop up and then wrap around rather than just loop over it?
    Ok, I see what you mean. Yours must be different. Mine does not have a hole. It has a circumferential groove. the loop of rope just goes over it and sits within groove where it rotates freely. The groove has a plastic insert liner to reduce friction. So I guess, in your case, I dunno.
    Maybe someone else here has the same type of pylon.
    2015 Moomba Mojo.
    400 ford raptor engine.
    Surf edition, 1450# Enzo's
    2018 Yamaha Waverunner(Just to fool around)
    2018 F150 Lariat
    sport edition, 3.5lt ecoboost

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •