Results 11 to 20 of 177
Thread: May 2019 Pic Thread
-
05-02-2019, 08:24 PM #11
-
05-02-2019, 10:46 PM #12David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
05-03-2019, 07:04 AM #13
-
05-03-2019, 07:05 AM #14David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
05-03-2019, 09:50 AM #15Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
I tow with them every time. Don't go full HAM on them, but it'll keep the bout out of the bed of the truck in the case of an emergency!
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
05-03-2019, 10:56 AM #16
My dealer told me I didn’t need straps and just the winch strap would be ok. I wonder if that’s his truck...
Sent from my iPhone using Tapatalk2011 Mobius LSV
2005 Mobius LS (sold)
-
05-03-2019, 11:06 AM #17Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
05-03-2019, 11:37 AM #18
-
05-03-2019, 02:26 PM #19Senior Member
- Join Date
- Apr 2016
- Posts
- 223
That truck must have some serious f'g brakes and the trailer bunks must be made of teflon or HDPE.
2016 Craz
-
05-03-2019, 05:10 PM #20
May 2019 Pic Thread
Home stretch!
No I opted for the factory installed unit, and it is super easy to use. The standard sliding bench seat is awesome just to be able to get easy access to the strainer and vdrive.
Appreciate it! Had a local shop do it and they used a 2-3 stage polish and I believe Carbrite 9H ceramic.
I wondered the same thing but like Hack said, when you take the tour you see that everything screwed into the hull has full, self-healing backers. Anchors are backed for tower, cleats, handles, tracking fins, transom platform mounts, etc. Not even Nautique can say that, there is a rebuild video floating around where it shows the tower anchors on a 210 are just through-bolted.
I also think the transom straps are more of a stability thing than an actual anchor. My guess is they just serve to keep the stern centered. If you think about it it seems like the vast majority of the boaboats weight will always be resting on the bunks, something has to really be going wrong (ie boat is lifting off the trailer) for a substantial amount of weight to be put on the straps. At the end of the day, my dealer installed the straps and told me where to mount them, if something goes wrong in normal use it will be on them I guess.
Sent from my iPhone using Tapatalk--
2019 Craz